My Library Window & a Simple How-to
Thanks to all of you who stopped by to give your opinion on which fabric you liked best for my library window! It’s always fun to see what you think. All I have to say is that I’m glad I chose the blue & white, because most of you would’ve been very disappointed if I hadn’t!So, the panels are up & here they are. (Thank you to my handsome assistant for hanging yet another curtain rod! I promise I’ll give you a break for a while!)Anyway, I’m on the path to an bold & eclectic travel library. You’ll be surprised to see what ends up in there. No, really– it’s a surprise because I have no idea myself. I’ll just have to wait & see what I find in my treasure hunting. I never know what’s going to be next.But, meanwhile, I’m posting a simple how-to on making a basic drapery panel like these. Some of you are intimidated to try to make your own panels, but you should know that these are SO simple and if you can sew a straight line, you can do this.Here’s what to do:Determine the length of fabric you’ll need by measuring your window from where you want it to start at the top to where you want it to hit at the floor. This will be the finished length of your panel. Then, you’ll need to add extra length to allow for a top & bottom hem. For instance, I usually allow for about a 4 1/2 inch hem on the bottom & 2 inches on the top. I almost always write out my plan on paper just to be sure I’m calculating it all correctly. You’ll also need a drapery lining for this type of panel. I always buy a very basic one in a light to medium weight in ivory. When you’re ready to cut the fabric, try to find some floor space large enough to lay the fabric out smooth & flat. Making the first cut is definitely the most nerve-wracking part, so my best advice is to measure it out, double-check your measurements, then say a prayer that you haven’t made a mistake. This method usually works great.I personally prefer to cut the lining a few inches shorter than the length of the fabric because it makes it just a little easier to work with later. You also need to measure the width of both your fabric & liner & then make the necessary cut to make the liner width approximately 3 inches less than the fabric width. (A quick way to make this cut is to fold the liner in half a few times, making sure the edges are very straight, then measure & cut.)This will allow the fabric to fold around the edges of the finished panel, giving it a professional look. Here’s how it looks on the finished panel:
Jan @ bobbypins boardwalk
November 20, 2010 @ 2:58 am
It looks remarkable. I'm so happy you went with the blue and white. It was a wonderful choice. Great job on your sewing and tutorial. Why do you use an ivory lining, as opposed to a white lining? Just curious. I figure there must be a reason.
Samantha
November 20, 2010 @ 3:04 am
THe blue and white drapes look beautiful! Good job đŸ™‚ And thanks for the tutorial!
NanaDiana
November 20, 2010 @ 3:16 am
Love the blue and white. Thanks for the tutorial-you did a great job! hugs- Diana
Angie
November 20, 2010 @ 3:35 am
The look amazing!!!!
Julie Scott
November 20, 2010 @ 4:43 am
I am happy you went with this choice- it looks great!! I also enjoyed that how-to…I love easy how-to's on sewing! can't wait to see what you find!
kathie
November 20, 2010 @ 12:42 pm
The panels are gorgeous and I especially love the pop of color ~ so fun!
Kathy @ Creative Home Expressions
November 20, 2010 @ 1:49 pm
Your drapes look gorgeous, Julie! I'm looking forward to seeing you pull your library together. Sometimes it's good to just let things find you! I'm sure it will all come together really well.
Although, I have to say one of the first things that comes to mine is some kind of map wall art project. I'm sure you could replicate something that I've seen at either Pottery Barn or Restoration Hardware, and The Graphics Fairy has shared some maps on her blog. And there's my 2 cents for what it's worth! : )
Jen Borden
November 20, 2010 @ 2:31 pm
GORGEOUS!!!!
Amy
November 21, 2010 @ 3:51 pm
Wow! Great tutorial! Thanks so much for sharing this. I was just thinking that I needed some new curtains in my living room and I wanted to try and make them myself. I am visiting from Under the Table & Dreaming.
Pam @ diy Design Fanatic
November 22, 2010 @ 2:48 am
Your draperies are absolutely gorgeous!
Anonymous
November 24, 2010 @ 8:29 pm
Thanks For blog with usable informations.
723.home.plain & simple
June 18, 2011 @ 4:25 pm
You just made my day! I have been wanting to get BRAVE and try panels…this was a wonderful tutorial & your work is beautiful. Thank you for sharing…& wish me luck…because ALL I can sew is a straight line!
Karen S
August 20, 2011 @ 5:50 pm
I would love to know the formula for calculating the width of these panels! If I have a window that's 48" wide, for instance, and I want two panels, what is the width of each panel?
Julie
August 20, 2011 @ 6:40 pm
@Karen S
There's no exact formula for width. It depends mostly on your preference. For a 48" window, I'd recommend a width of 25"-54". Obviously, the wider the fabric, the fuller the panel will be when pulled to the sides. And you may even consider extending the rod & panels past the window on each side to make the window appear even larger. Hope this helps you. Feel free to email me if you have further questions.